About us

C. Melchers GmbH & Co. was founded in 1806 and is a diversified International Services Group that has actively involved in the China Trade since mid of the 19th century. Melchers in Greater China offers logistical, sourcing and distribution services, warehousing, as well as technical after sales with more than 400 staff members.

Melchers is the exclusive importer and distributor of Asutec products in China, distribute Asutec products in China and provide the related services.

Products and services

ELECTRIC AND PNEUMATIC SEPARATOR
stops, separates and damps one or more accumulated workpiece carrier at a defined workpiece carrier plate in conveyor systems.

ANGLE DAMPER
dampen workpiece carriers to a stop and are mainly used where workpiece carriers are changing direction at a cross-intersection. e.g. when the workpiece carrier is changing its transport direction from a transverse section into a longitudinal section and vice versa.

ACCELERATOR MODULE
ensures that the part being machined leaves the machining station more quickly, allowing the next machining cycle to begin at an earlier stage.

POSITIONING UNIT
serve for fast, precise, vertical lifting and indexing of workpiece carriers.

RETURN STOP
prevent the workpiece carrier from rebounding after the stopping procedure of the separator and can hold the workpiece carrier at the desired location.

SLIDE STOPS
are designed to stop the workpiece carrier transverse movement and position it over the lift transfer unit for lowering onto the main conveyor section.

SEPARATOR

stops, separates and damps one or more accumulated workpiece carrier at a defined workpiece carrier plate in conveyor systems or at the working piece directly.

Further reading

ANGLE DAMPERS

dampen workpiece carriers to a stop and are mainly used where workpiece carriers are changing direction at a cross-intersection. For example, when the workpiece carrier is changing its transport direction from a transverse section into a longitudinal section and vice versa.

Further reading

ACCELERATOR MODULE

ensures that the workpiece being machined leaves the machining station more quickly, allowing the next machining cycle to begin at an earlier stage.

Further reading

Address
Melchers (HK) Limited
18/F., Unit C - E, Billion Plaza 2, 10 Cheung Sha Wan, Kowloon.
Hong Kong
P. R. China

Phone: +852 2546 9069
Fax: +852 2559 6552
Internet: www.melchers.com
E-mail: Send message

Contact person

Shirley Lau
General Manager - Industrial Consumer Products Dept
Phone: +852 2589 1565
E-mail: Send message

Representative
Melchers (Shanghai) Limited
Beijing 13/F., East Ocean Center, 588 Yanan Road (East),Room 503, No. 10 Chang An Ave, (East),
200001 Shanghai
P. R. China

Phone: +86 21 63528848
Fax: +86 21 63513138
Internet: www.melchers.com
E-mail: Send message

News & Innovations

ASUTEC grippers
The ASUTEC grippers with two gripper jaws are ideally suited for universal gripping in numerous application areas. The use of high-strength aluminum significantly reduced the weight while achieving a high degree of stability. Due to the oval piston geometry, the largest possible piston area is achieved, which leads to maximum closing moments and gripping forces. The position of the gripping jaws can be detected by inductive sensors and magnetic field sensors (C-slot sensors). The grippers are available in many sizes with a wide range of accessories.
Further reading

Click here if you notice an image that violates copyright or privacy rights.

Get in contact